Impact of impurities on the fabrication and performances of yttrium-doped thoria electrolyte ceramics

Abstract

The effect of several impuritites on the life-cycle of yttria-doped thoria electrolyte was evaluated in this study. All the oxides exhibited the single-phase fluorite-type structure expected for such materials, while the variation of the unit cell parameter attested for the incorporation of the impurities in the lattice. Doping with 0.2 – 1 wt.% of Al, Si or Zr only slightly affected the morphology of the powders, as well as the microstructure of the pellets obtained after sintering, even if a deleterious effect, leading to the fragilization of the samples, was observed for high silicon contents.The presence of silicon and zirconium in the ceramic further modified its electrical properties. The grain conductivity was always found to decrease. Impedance spectroscopy also revealed a strong modification of the signal assigned to grain boundaries, which evidenced that impurities partially migrated during the sintering step. Finally, corrosion tests undertaken in liquid sodium at 773 K showed that the pellets were fragilized by the presence of silicon or high zirconium contents, possibly through the formation of Na2MO3 ternary oxides at the grain boundaries.From a general point of view, silicon seems to be the most harmful impurity that should be especially checked during the fabrication processes.