Abstract
The Dual Stage Pressure Retarded Osmosis technique is considered for power generation. The influence of feed flow rates, hydraulic pressure, and pressure drop on mass transfer and solute diffusion in a full-scale membrane model was investigated for the first time to maximize power generation. Dead Sea-seawater, Dead Sea-reverse osmosis brine, reverse osmosis brine-wastewater, and seawater-wastewater salinity gradient resources were investigated for power generation. Results revealed a 71.07% increase in the specific power generation due to the dual-stage pressure retarded osmosis process optimization using Dead Sea-seawater salinity gradient resources. The increase in the specific power generation due to the dual-stage pressure retarded osmosis optimization was 108.8%, 63.18%, and 133.54%, respectively, for Dead Sea-reverse osmosis brine, reverse osmosis brine-wastewater, and seawater-wastewater salinity gradient resources. At optimum operating conditions, using the dual-stage pressure retarded osmosis process as an alternative to the single pressure retarded osmosis process achieved up to a 22% increase in the energy output. Interestingly, the hydraulic pressure at optimum operating conditions was slightly higher than the average osmotic pressure gradients in the dual-stage pressure retarded osmosis process. The study also revealed that power generation in the dual-stage pressure retarded osmosis process operating at constant mass transfer and solute resistivity parameters was overestimated by 2.8%.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have