Abstract
An investigation into the non-premixed combustion characteristics of methane in a planar micro-combustor with a splitter was performed. The impact of blending methane with hydrogen on these characteristics was also analyzed. Additionally, the effects of inlet velocity and global equivalence ratio on flame location, flame temperature, combustion efficiency and outer wall temperature were studied for three different fuel compositions: pure methane (MH0), 60% methane with 40% hydrogen (MH40), and 40% methane with 60% hydrogen (MH60)). A heat recirculation analysis of the combustor wall was conducted to determine the amount of heat recirculated into the unburnt gas at various inlet velocities for all three fuel compositions. The results demonstrated that the stability limit of methane in terms of inlet velocity (1–2 m/s) and global equivalence ratio (1.0–1.2) was significantly enhanced to 1–3 m/s and 0.8–1.2, respectively, with the addition of hydrogen. At an inlet velocity of 2 m/s, the flame location of 3.6 mm for MH0 was significantly improved to 2.2 mm for MH60. Additionally, outer wall temperature exhibited a rise of 100 K for MH60 compared to MH0. Furthermore, from heat recirculation analysis, when the ratio of heat recirculated to heat loss exceeded unity, the flame started exhibiting the lift-off phenomenon for all the fuel compositions.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
