Impact of gravity, collector surface roughness and fracture orientation on colloid retention kinetics in an artificial fracture

Abstract

The interaction of monodisperse fluorescent carboxylated polystyrene colloids (25nm and 1000nm diameter) with a cut granodiorite surface (Grimsel granodiorite; Switzerland) and with acrylic glass is investigated both experimentally and numerically. Colloid transport experiments are conducted in a parallel plate type fracture flow cell with an aperture of 0.75mm at pH5 under low ionic strength (1mM NaCl) and under laminar flow (7mL/h) conditions. The study focuses on the effect of residence time, colloid size, collector material and fracture orientation on colloid retention. Long colloid residence times are achieved by stop-flow experiments. Using atomic force microscopy and, more specifically, the colloid probe technique surface roughness and force distance information of the collector material (granodiorite or acrylic glass) as a function of probe size (cantilever) are obtained. The experiments are modeled using COMSOL Multiphysics® (2-D numerical simulations). The experimental and the modeled results lead to the conclusion that large colloids (1000nm diameter) undergo sedimentation and deposition on the surface during stop-flow. Collector interaction is not affected by the surface roughness variation. Contrariwise, for the investigated 25nm colloids sedimentation does not play a role under the experimental conditions and collector interaction is triggered by surface inhomogeneities such as surface roughness.