Impact of gate-poly grain structure on the gate-oxide reliability [CMOS

Abstract

Time dependent dielectric breakdown of thin oxides, 1.5 to 5.0 nm has been studied for different gate-poly grain structures. The poly grain was varied by the poly deposition, and the source-drain (S/D) rapid thermal anneal (RTA) conditions. The study, which was done on fully fabricated CMOS devices, showed substantial reliability degradation in thin gate oxides (below 2.0 nm), when using S/D RTA temperatures above 1000/spl deg/C. The results can be explained in terms of the interface roughness at the gate poly interface induced by the S/D RTA temperature above the viscoelastic point of the SiO/sub 2/. A possible mechanism for the drastic reliability degradation in thin gate oxides, is the protrusion of poly grains into the softening oxide at high temperature.