Abstract
In order to reveal the impact of fracturing fluid retention and flowback on the development effect after large-scale fracturing in shale oil wells, and to formulate a reasonable flowback policy, this paper employs a combination of core physical simulation experiments and theoretical analysis. We have designed a specially designed device that can evaluate the development effect of quasi-natural energy in oil reservoirs. The impact of fracturing fluid retention on development is simulated by changing the amount of fracturing fluid injected into the formation in a fractured horizontal well model (referred as injection volume), and the impact on development effect is analyzed by changing the properties of fracturing fluid to adjust the difference in the degree of flowback. Based on the experimental results, the mechanism of fracturing fluid retention and flowback after large-scale fracturing in shale reservoirs is further explored. The results of the experiments show that the flowback rate of fracturing fluid exhibits a monotonic decreasing trend with increasing the volume of injected fluid, as increasing the volume of injected fluid helps to enhance its retention in the formation and reduce the flowback rate. The degree of fracturing fluid flowback is critical to the mobility of crude oil in the tight reservoir. The entering of fracturing fluid into the reservoir slows down the rate of discharge in the fracture network, effectively extending the reach of the fracturing fluid in the tight reservoir and allowing more crude oil to be used, which in turn results in higher crude oil production. However, too much injection fluid may affect the fluid production. Simulation experiments reveal that the use of fracturing fluid retention or controlling the rate of flowback by changing the viscosity of fracturing fluid can be a way to enhance the development effect of horizontal shale oil wells. The results of this paper provide a basis for understanding the mechanism of shale oil development, exploring technical ideas to improve the development effect, and making decisions on the flowback parameters.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.