Abstract

AbstractGypseous soils are considered one of the most problematic soils. The skirted foundation is an alternative technology that works to improve the bearing capacity and reduce settlement. This paper investigates the use of square skirted foundations resting on gypseous soil subjected to concentric and eccentric vertical load with eccentricity values of 4, 8, and 17 mm in 16 experimental model tests. To obtain the results by using this type of foundation, a small-scale physical model was designed to obtain the load–settlement behavior of the square skirted foundation; the dimension of the square footing is 100 mm × 100 mm with 1 mm thickness, the skirt depth (Ds) was 0.5, 1, and 1.5B(whereBis the footing width). The footing rests on dry gypseous soil with a relative density of 33%. The tests show that the gypsum content of the soil is 59%. The result shows that the highest bearing capacity for the square shape footing withDs/B= 1.5 subjected to concentric load results in an improvement ratio of 190%. For the eccentric load, withDs/B = 1.5, the increase in bearing capacity is about 120% ate= 8 mm when compared with using a foundation without a skirt.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.