Abstract

The one-pot hydrolysis-dehydration of activated microcrystalline cellulose was studied in pure hydrothermal water at 453 K over ZrO2 catalysts produced by thermodegradation, microwave treatment, mechanical activation, and sol–gel methods and spent without any co-catalyst. ZrO2 prepared by microwave treatment was more active compared to ones derived by other methods. The catalyst calcination temperature also impacted reactivity. The cellulose conversion increased simultaneously with acidity and SBET, which in turn were set by the preparation method and calcination temperature. Phase composition did not affect the activity. Yields of glucose and 5-HMF reaching 18 and 15%, respectively, were over the most promising ZrO2 prepared by microwave treatment at 593 K. To our knowledge, this ZrO2 sample provided the highest activity in terms of TOF values (15.1 mmol g−1 h−1) compared to the pure ZrO2 systems reported elsewhere. High stability of ZrO2 derived by microwave irradiation was shown in five reaction runs.

Highlights

  • The samples of ZrO2 catalysts were prepared from different precursors by thermodegradation (TD), microwave treatment (MW), mechanical activation (MA), microwave treatment combined with mechanical activation (MA + Microwave Treatment (MW)), and the sol–gel method (SG)

  • Zirconium dioxide samples prepared by microwave treatment differ in microwave irradiation power and processing temperature from

  • The transformation of cellulose was studied in hydrothermal pure water at 453 K to

Read more

Summary

Introduction

Cellulose is well known to be the most abundant natural plant polymer. In recent years, it has been proposed for use as a raw material for chemical and material sciences [1,2,3]. Significant interest in cellulose transformations has been affected by the serious negative influence of traditional fossil resources such as oil and coal on the environment and human health. New catalytic approaches have been developed for the production of various chemicals and biofuels from inedible cellulose [4,5,6,7,8,9,10,11,12,13,14]. New catalytic approaches have been developed for the production of various chemicals and biofuels from inedible cellulose [4,5,6,7,8,9,10,11,12,13,14]. 5-Hydroxymethylfurfural (5-HMF)

Objectives
Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call