Abstract

Swirlers are commonly used in gas turbine combustors as they provide recirculation zones and reduce axial velocity for enhanced flame stability. Swirl provides hot gas recirculation zone at front end of the combustor for enhanced mixing between hot reactive species and the freshly introduced mixture. In this paper, the impact of confinement on a swirl assisted combustion was investigated with focus on the flowfield under unconfined and confined conditions. The features of the flowfield were characterized under both isothermal and reacting conditions. Experimental results showed that for the unconfined cases, the flowfield exhibited the traditional central toroidal recirculation zone. Upon confinement, this zone shortened and also widened with increased velocity fluctuations across the combustor. Increase in the Reynolds number further enhanced the recirculation zone and increased the velocity magnitudes and turbulence. For reacting conditions, minimal recirculation was noticed for the unconfined flame. The recirculation zone was significantly enlarged upon confinement (compared to the non-reacting case) and with increase in Reynolds number. In general, the fluctuating velocity was found to be higher in the confined case compared to the unconfined case, and even higher at increased Reynolds number.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.