Abstract
Emulsion gels are gaining interest as fat replacers due to their benefits associated with calorie reduction and their versatility in a wide range of products. Their production process needs to be tailored to obtain the desired stability and physicochemical properties. This study investigated the effect of heat (70, 80, and 90 °C) and pressure (5, 10, and 15 MPa) to produce whey protein emulsion gels using a pilot-scale tubular heat exchanger equipped with a homogenization valve. Both temperature and pressure determined a significant effect (p < 0.05) on the rheological moduli, with the treated samples displaying a predominant elastic behavior. The treatments also showed an improved pseudoplasticity due to the significant reduction in the flow behavior index (p < 0.05). All the samples showed a bimodal particle size distribution; by increasing the temperature up to 80 °C, a reduction in Dv50 (50th percentile) values compared to the control samples was observed. At 90 °C, the Dv50 value increased because of coalescence and flocculation phenomena occurring during or immediately after processing. The greater aggregation and structural development obtained with stronger process conditions improved the stability of the emulsions. The results show the capability to produce gel emulsions with good physical properties that could be proposed as food ingredients to substitute fats in food products.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
