Impact of buffering capacity on the acidification of wort by brewing-relevant lactic acid bacteria

Abstract

Acidified wort produced biologically using lactic acid bacteria (LAB) has application during sour beer production and in breweries adhering to the German purity law (Reinheitsgebot). LAB cultures, however, suffer from end product inhibition and low pH, leading to inefficient lactic acid (LA) yields. Three brewing-relevant LAB (Pediococcus acidilactici AB39, Lactobacillus amylovorus FST2.11 and Lactobacillus plantarum FST1.7) were examined during batch fermentation of wort possessing increasing buffering capacities (BC). Bacterial growth was progressively impaired when exposed to higher LA concentrations, ceasing in the pH range of 2.9–3.4. The proteolytic rest (50°C) during mashing was found to be a major factor improving the BC of wort. Both a longer mashing profile and the addition of an external protease increased the BC (1.21 and 1.24, respectively) compared with a control wort (1.18), and a positive, linear correlation (R2 = 0.957) between free amino nitrogen and BC was established. Higher levels of BC led to significant greater LA concentration (up to +24%) after 48 h of fermentation, reaching a maximal value of 11.3 g/L. Even higher LA (maximum 12.8 g/L) could be obtained when external buffers were added to wort, while depletion of micronutrient(s) (monosaccharides, amino acids and/or other unidentified compounds) was suggested as the cause of LAB growth cessation. Overall, a significant improvement in LA production during batch fermentation of wort is possible when BC is improved through mashing and/or inclusion of additives (protease and/or external buffers), with further potential for optimization when strain-dependent nutritional requirements, e.g. sugar and amino acids, are considered. Copyright © 2017 The Institute of Brewing & Distilling