Abstract

This paper presents experimental and numerical results for 1/ f noise of depletion-type dual-gate MOSFET (DGMOSFET) in the linear region of the output I D– V DS characteristics. In this region, both DGMOSFET inner transistors operate in either linear or non-linear region each. Gate-to-gate interelectrode spacing influence is taken into account in I D– V DS modelling with the effective parameter m eff = μ eff2 L eff1/ μ eff1 L eff2. For low bias conditions, the parameter m eff can be reduced to the ratio of inner transistors channel effective lengths. A model for the normalized 1/ f noise parameter and methodology for its calculation valid for the DGMOSFET linear region have been proposed. Due to interdependence of the inner transistors bias condition, their participation in total noise is controlled by weighting factors. This fact must be taken into account in the noise diagnostic procedure for DGMOSFET analysis.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.