Impact of BaTiO3 on the structural, optical, and nuclear radiation shielding parameters of poly(methyl methacrylate) nanocomposites as transparent shielding material

Abstract

Six weight percentages (0, 2, 5, 10, 15, and 20 wt(%)) of barium titanate BaTiO3 were doped as a nanoparticle in poly(methyl methacrylate) PMMA and their optical and nuclear radiation shielding properties were investigated. The XRD patterns, FTIR spectra and SEM images confirmed that the nanocomposite films were successfully prepared. The pure PMMA sample demonstrated a significant degree of transparency, approximately 90%. The inclusion of BaTiO3 resulted in a significant reduction in the optical bandgap while maintaining a moderate transmittance level of approximately 40% at a concentration of 10 wt (%). The direct and indirect band gap energy of PMMA were decreased from 4.81 eV to 4.62 eV–1.64 eV and 1.09 eV, respectively, after doping with 20 wt(%) BaTiO3 nanoparticles. The refractive index of the investigated samples was determined using various approaches and seen to increase after nanofiller addition. Seven energy lines, from Eu-152, Cs-137, Na-22 and Ra-226 radioactive gamma ray sources, were used to deduce the gamma ray shielding parameters of the prepared samples. Also, three neutron energy ranges were used to measure the macroscopic cross-sections for the investigated samples. The results showed good agreement between measured values of mass attenuation coefficients and those calculated by WinXCOM computer program. Furthermore, the optimal weight percentage of BaTiO3 in PMMA for attenuation of all examined gamma ray energies was 10 wt (%), whereas it was 15 wt (%) for the investigated three neutron energy ranges. In other words, a novel flexible, transparent and non-toxic polymer nanocomposite shielding material is presented and the samples containing 10–15 wt(%), demonstrates improved radiation attenuation.