Abstract
Light trapping strategies, such as light scattering films (LSFs) present an opportunity to increase the power generated by Si photovoltaic modules. Evaluation of the benefits of these strategies for manufacturing decisions currently relies on current-voltage measurements performed using solar simulators under standard test conditions, with uncertainties representing expected variations due to different angles of incidence that result from the light sources of solar simulators. The practical achievement of normal incidence is challenging and consequently the angular irradiation profile varies between different solar simulators. In this article, we show that use of LSFs can enhance the short circuit current density, J <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">SC</sub> , of modules by 2.5% under normal incidence as compared to enhancements of 2.33%, 2.12%, and 1.56% measured using three different solar simulators (two short-tunnel and one table). This variation is due to the less effective light trapping of LSFs under more diffuse light. The angular response of these LSF modules on electricity yield is demonstrated through simulations using the angular matrix framework and SunCalculator software. The average J <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">SC</sub> enhancement varies from 1.46% (Cologne) to 1.63% (Alice Springs) corresponding to a decrease in diffuse irradiation at Alice Springs. Differences in measured J <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">SC</sub> from three solar simulators can result in the predicted average J <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">SC</sub> enhancements varying from -0.07% to 0.87% absolute, with the table simulator more closely predicting the average J <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">SC</sub> enhancement. This highlights the importance of considering the angular profiles of solar simulators if electricity yield and hence returns on investment for PV deployments is to be more accurately predicted.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
