Abstract
AbstractThe problem of impact–entrainment relationship is one of the central issues in understanding saltation, a primary aeolian transport mode. By using particle dynamic analyser measurement technology the movement of saltating particles at the very near‐surface level (1 mm above the bed) was detected. The impacting and entrained particles in the same impact–entrainment process were identified and the speeds, angle with respect to the horizontal, and energy of the impacting and entrained sand cloud were analysed. It was revealed that both the speed and angle of impacting and entrained particles vary widely. The probability distribution of the speed of impacting and entrained particles in the saltating cloud is best described by a Weibull distribution function. The mean impact speed is generally greater than the mean lift‐off speed except for the 0·1–0·2 mm sand whose entrainment is significantly influenced by air drag. Both the impact and lift‐off angles range from 0° to 180°. The mean lift‐off angles range from 39° to 94° while the mean impact angles range from 40° to 78°, much greater than those previously reported. The greater mean lift‐off and especially the mean impact angles are attributed to mid‐air collisions at the very low height, which are difficult to detect by conventional high‐speed photography and are generally ignored in the existing theoretical simulation models. The proportion of backward‐impacting particles also evidences the mid‐air collisions. The impact energy is generally greater than the entrainment energy except for the 0·1–0·2 mm sand. There exists a reasonably good correlation of the mean speed, angle and energy between the impacting and entrained cloud in the impact–entrainment process. The results presented in this paper deserve to be considered in modelling saltation. Copyright © 2002 John Wiley & Sons, Ltd.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.