Abstract
Low-velocity impact damage is a major concern in the design of structures made of composite materials, because impact damage is hidden and cannot be detected by visual inspection. Piezoelectric sensors can be used to detect variations in structural and material properties for structural health monitoring. In this study, polyvinylidene flouride (PVDF) and lead zirconate titanate (PZT) sensors are used for monitoring impact damage initiation and propagation in composite laminates to illustrate this potential benefit. Several tests for monitoring the stress wave signals including acoustic emission due to failure modes, such as matrix cracking, delamination, and fiber breakage are performed. A series of impact tests at various impact energies by changing the impact mass and height is performed on the instrumented drop weight impact tester. The wavelet transform (WT) and short time fourier transform (STFT) are used to decompose the piezoelectric sensor signals in this study. Test results show that the particular waveform of sensor signals implying the damage initiation and propagation are detected above the damage initiation impact energy. It is found that both PZT and PVDF sensors can be used to detect the impact damage.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Journal of Intelligent Material Systems and Structures
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.