Abstract

BackgroundWaxes are esters of long-chain fatty acids and long-chain alcohols. Their principal natural sources are animals (sperm whale oil) and vegetables (jojoba) which are expensive and not easily available. Wax esters synthesized by enzymatic transesterification, using palm stearin as raw material, can be considered as an alternative to natural ones.ResultsPalm stearin is a solid fraction obtained by fractionation of palm oil. Palm stearin was esterified with cetyl alcohol to produce a mixture of wax esters. A non-commercial immobilized lipase from Rhizopus oryzae was used as biocatalyst. Response surface methodology was employed to determine the effects of the temperature (30-50°C), the enzyme concentration (33.34-300 IU/mL), the alcohol/palm stearin molar ratio (3-7 mol/mol) and the substrate concentration (0.06-0.34 g/mL) on the conversion yield of palm stearin. Under optimal conditions (temperature, 30°C; enzyme concentration, 300 IU/mL; molar ratio 3 and substrate concentration 0.21 g/mL) a high conversion yield of 98.52% was reached within a reaction time of 2 h.ConclusionsResponse surface methodology was successfully applied to determine the optimum operational conditions for synthesis of palm stearin based wax esters. This study may provide useful tools to develop economical and efficient processes for the synthesis of wax esters.

Highlights

  • Waxes are esters of long-chain fatty acids and long-chain alcohols

  • Immobilized Rhizopus oryzae lipase was used to catalyze the synthesis of wax esters

  • The addition of hexane to the reaction medium was found necessary to improve the stability of the immobilized Rhizopus oryzae lipase and the solubility of the substrates

Read more

Summary

Introduction

Waxes are esters of long-chain fatty acids and long-chain alcohols. Their principal natural sources are animals (sperm whale oil) and vegetables (jojoba) which are expensive and not available. Wax esters synthesized by enzymatic transesterification, using palm stearin as raw material, can be considered as an alternative to natural ones. Palm oil contains a mixture of high and low melting triglycerides. By a simple dry fractionation process under a controlled temperature, palm oil can be resolved into a liquid (olein) and a solid (stearin) fraction [2]. The palm olein fraction is the mostly used in industry due to its low melting point [3]. The high melting point of palm stearin (4456°C) poses problems in manufacturing of edible fats such as margarine and shortenings as it confers low

Objectives
Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call