Immobilization of Lecitase® Ultra onto the Organic Modified SBA-15 for Soybean Oil Degumming.

Abstract

In this study, SBA-15 was functionalized by organic groups (-CH3, -C4H9, -C8H17, -CH2CH2NH2, -C6H5, et al.), and then Lecitase® Ultra (LU) was immobilized onto the modified SBA-15 for soybean oil degumming. The hydrolysis activity, degumming performance, reusability in degumming, and the composition of phospholipids in the gum, of the immobilized LU samples, were carefully studied. Hydrolysis activities over 1800 U/g were obtained from all the immobilized LU samples. The highest activity of up to 4554.17 U/g was observed from the 3-ureidopropyl group-modified SBA-15-supported LU. Most of the immobilized LU samples removed the phospholipids effectively from crude soybean oil (initial phosphorous content 314.23 mg/kg), with a residual phosphorus content of less than 10 mg/kg. The reusability of the immobilized LU samples in the degumming process was evaluated. No loss of activity was observed from the methyl and N-(2-aminoethyl)-3-aminopropyl group-modified SBA-15-supported LU samples after five cycles of reuse. In addition, 3-aminopropyl and 3-glycidyloxypropyl group-modified SBA-15-supported LU samples retained over 90% of their initial activity; N-phenylaminomethyl and 1-isocyanatopropane group-functionalized SBA-15-supported LU samples retained approximately 80% of their initial activity. The phospholipids in the gum were analyzed. The n-octadecyl and N-(2-aminoethyl)-3-aminopropyl group-functionalized SBA-15-supported LU samples were selective for lysophosphatidylethanolamine (LPE) preparation, and LPE percentages up to 37.14 and 38.80% were obtained, respectively. The N-phenylaminomethyl group-modified SBA-15-supported LU showed selectivity toward lysophosphatidylcholine (LPC) production, with an LPC percentage of up to 38.5%.