Image quality dependence on in-plane positions and directions for MDCT images

Abstract

Objective The present study was performed to examine the dependence of image quality on in-plane position and direction in computed tomography (CT) imaging using the modulation transfer function (MTF), noise power spectrum (NPS) and analysis of signal-to-noise ratio (SNR). For detailed analysis of SNR, the low-contrast detectability was compared using simulated small low-contrast objects. Materials and methods Three models of multidetector-row CT (MDCT) were employed. The measurement positions for MTF were set to the isocentre and several peripheral areas, and NPS and SNR were calculated for the isocentre and 128 mm off-centre. To evaluate directional dependence, the one-dimensional physical properties were measured separately in the radial and azimuthal directions. Seven radiological technologists also performed a perceptual detection study at the different in-plane positions using computer-simulated low-contrast images. Results The results of MTF and SNR differed between the isocentre and the peripheral area. The MTF values also tended to decrease with distance from the isocentre, and the SNR values in the low frequency range for the peripheral area were superior to those for the isocentre. In the detection study, the low-contrast detectability in the peripheral area was 13–40% higher than the value in the isocentre. Conclusion The results of the present study indicated that clinical CT images have remarkable non-uniformity of image quality. Therefore, the detailed analysis performed in this study will provide useful information for the development of advanced image processing applications, such as computer-aided diagnosis (CAD) and de-noising of CT images.