Image generation in chirp pulse microwave computed tomography (CP‐MCT) by numerical computation: Computation of a human head model

Abstract

AbstractThis paper considers chirp pulse microwave CT (CP‐MCT), in which the chirp pulse and signal processing technology are used to estimate the internal structure and temperature variation of biological objects. A method is developed in which the CT image to be acquired by actual measurement can be derived by numerical computation. The aftereffect function between the transmitting and receiving antennas is calculated by a Gaussian pulse and the FDTD method. After convolution of the function with the input chirp pulse signal on the time axis, the measured signal at a point is constructed by the same signal processing as in real measurement. This computation is repeated for each point on the translation‐scanning axis. The projection data are acquired and the CT image is generated. The validity of this computation procedure, which is called the aftereffect function method, is demonstrated by comparing the resolution and the measured temperature variation in actual measurements with the results of a simulation computation. Using the aftereffect function method, the point‐spread function of an imaging system which is difficult to measure, can be derived. An analytical model for the human head is constructed. Simulations are performed for the attenuation distribution and the temperature variation distribution. Based on the results, the feasibility of the biological imaging by CP‐MCT is discussed. © 2005 Wiley Periodicals, Inc. Electron Comm Jpn Pt 3, 88(9): 53–63, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/ecjc.20190