Abstract
This communication treats of the formation, preparation, analysis, composition, common physical properties, and chemical behaviour of fluoride of silver. The salt was prepared by treating pure silver carbonate with an excess of pure aqueous hydrofluoric acid in a platinum dish, and evaporating to dryness, with certain precautions. The salt thus obtained invariably contains a small amount of free metallic silver, and generally also traces of water and of hydrofluoric acid, unless special precautions mentioned are observed. It was analyzed by various methods: the best method of determining the amount of fluorine in it consisted in evapoiating to dryness a mixture of a known weight of the salt dissolved in water, with a slight excess of pure and perfectly caustic lime in a platinum bottle, and gently igniting the residue at an incipient red heat until it ceased to lose weight. By taking proper care, the results obtained are accurate. The reaction in this method of analysis takes place according to the following equation, 2AgF + CaO = CaF 2 +2Ag + O. Sixteen parts of oxygen expelled equal thirty-eight parts of fluorine present. One of the methods employed for determining the amount of silver consisted in passing dry ammonia over the salt in a platinum boat and tube at a low red heat, The results obtained in the various analyses establish the fact that pure fluoride of silver consists of 19 parts of fluorine and 108 of silver.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.