Abstract

In this paper we have examined the potential of Yallourn brown coal char (collected from an industry-scale pyrolyser) to be used as a pulverized coal injection (PCI) fuel, its size-dependent properties, ignitability and combustibility under the simulated conditions of the blowpipe-tuyere section in a blast furnace. The combustion of individual sizes for Yallourn char was tested in a lab-scale drop-tube furnace (DTF) using pre-heated hot gas with a temperature up to 1000°C, and a particle residence time as short as 0.6s. Computational fluid dynamics (CFD) modelling was further conducted to optimize the char combustion conditions via sensitivity analysis. Irrespective of the pyrolysis condition, Yallourn char is superior over bituminous coal for being used as a top grade PCI fuel, due to its higher calorific value (7500–8110kcal/kg), lower ash content (<10wt%), high ash melting temperatures (>1550°C), and abundance of iron (>40wt% in ash). The performance of Yallourn char is also superior over bituminous coal under the simulated blast furnace conditions, for a rapid ignition and burnout even for a coarse char size of 300μm under the stoichiometric O2/C molar ratio and using low blast temperatures of 800–1000°C. All these are beneficial for reducing the energy consumption related to particle pulverization and the amount of oxygen for the combustion. With regard to the Yallourn char ignition and combustion in the hot gas, a minimum 6wt% volatile content is essential for a stable and rapid ignition of the volatiles at a gas temperature of 1000°C or below, since homogeneous ignition is predominant at low temperatures. However, once the blast temperature rises to 1200°C, the dependence on volatile content turns insignificant due to the dominance of the heterogeneous ignition, high C-O2 reactivity for the solid char, as well as the minimized pore diffusion control due to the large porosity (52.0–63.1%) of the Yallourn char tested here.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.