Abstract
<p><em>Wells X has decreased the pressure inside the well. The thing that needs to be done on the well to determine the cause of the pressure drop is by doing Pressure, Temperature, Spinner Survey (PTS Survey) test when the well is flowing (PTS flowing) and when the well is closed (PTS shut-in). PTS flowing is done with the aim of determining the depth and contribution of feedzone, as well as determining the potential of generating electricity wells. PTS shut-in is done to determine the outflow phenomenon and determine the conditions in the wellbore. Data obtained by PTS survey are pressure, temperature, spinner speed, and cable speed. Data acquired by the PTS tool during PTS flowing and then processed, obtained that well X has three feedzone zones, ie feedzone 1 at 1084-1164 mKU depth, feedzone 2 at depth 1168-1392 mKU, and feedzone 3 at 1532 depth -1564 mKU. The contribution given by each feedzone was 6.2 kg / s at feedzone 1, 2 kg / s at feedzone 2, and 1.9 kg / s in feedzone 3. With a total mass of 10.1 kg / s of steam and power plant of 8 ton / hr / mw, well X has an energy potential of 4.55 MWe.</em></p><p><strong><em>Keywords:</em></strong><em> Pressure Temperature Spinner, Feedzone Contribution, Superheat, Condition of Wells, Reservoir Conditions</em></p>
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Mechanical Engineering and Mechatronics
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
