Identification of scanner models by comparison of scanned hologram images

Abstract

A method to identify scanner models that had been used to forge low-level counterfeit currencies was proposed in this study. The method identified a scanner model by characterizing differences between hologram images that exist in low-level counterfeit currencies. Twenty scanners of 18 different models were used to make samples of hologram images used in this study. The method was divided into two steps: identification of capturing conditions and identification of the scanner model. The first proposed protocol used correlations of spatial distribution of brightness to identify capturing conditions. A second proposed protocol used correlations of color distributions to identify a scanner model. The effectiveness of the protocols was demonstrated with numerical methods and sample images.The preliminary study revealed that it is necessary to consider the orientation of the holograms when the scanner models were identified, but 180° rotations can be ignored. Moreover, it is necessary to consider position in the main scanning direction of the bed for charged-coupled-device scanners. The demonstration showed that the first protocol could correctly identify the capturing conditions of almost all hologram images. However, one image could not be identified correctly; the protocol could distinguish images captured by charged-coupled-device scanners and those captured by contact image sensor scanners if the hologram was placed on the right or left edge of the scanner bed, but could not distinguish them if the hologram was placed on the inside. The demonstration also showed that the second protocol could correctly identify scanner models of all hologram images.