Abstract
The stability of oil-free high-speed turbo-machinery can be effectively improved by increasing the damping characteristic of the gas foil bearing (GFB). Novel hybrid bump-metal mesh foil bearings (HB-MFBs) have been previously developed. Prior experimental results show that the parallel combination of bump structure and metal mesh not only can improve the structure stiffness but also provide better damping property compared with the bump-type foil structure. To investigate the dynamic behavior of floating HB-MFBs and promote its application, this study measured the dynamic force coefficients of HB-MFBs on a rotating test rig. The vibrations of HB-MFBs with different mesh densities (40%, 32.5%, and 25%) and a generation І bump-type foil bearing (BFB) with similar size are measured under static and impact loads to estimate the bearing characteristics. Static load test results show that the linear stiffness decreases when the air film is generated (from 0 rpm to 20 krpm) but increases gradually with speed (from 20 krpm to 30 krpm, and 40 krpm). Moreover, the dynamic force coefficients of HB-MFBs indicate the significant influence of metal mesh density on bearing dynamic characteristics. The growth in block density increases the dynamic stiffness and damping coefficients of bearing. The comparison of HB-MFB (32.5% and 40%) and BFB emphasizes the good damping characteristics of HB-MFB.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
