Identification and characterization of promising phase change materials for solar cooling applications

Abstract

Listen

Translate article

Solar cooling technology is an attractive way to use solar thermal energy to produce cooling for buildings. The employment of taphase change materials (PCMs) as heat storage medium, to increase the range of utilization of solar thermal energy, thus improving the overall system performance, is considered very attractive. Nevertheless, in order to allow the development of latent heat storage prototypes for such an application, it is mandatory to verify the thermo-physical performance as well as the long-term stability of the available materials. To this aim, in the present paper, the most attractive commercial PCM as well as neat chemical compounds operating in the temperature range between 80°C and 100°C, perfectly suitable for non-concentrating solar cooling systems, have been identified and completely characterized. In particular, several cycles have been performed on each material, to verify possible instabilities in their behavior. Most of the neat materials have confirmed to be promising for this application, thanks to their really high melting enthalpy, up to 255J/g as showed for Aluminum Ammonium Sulfate Dodecahydrate. Nevertheless, all these materials are still not stable, showing high supercooling, allotropic phase transition, incongruent melting and even absence of re-crystallization, which makes necessary an intense work to bring them to a reliability level sufficient for real application. On the contrary, the commercial PCMs, even if mostly characterized by lower melting enthalpy, ranging between 120 and 150J/g, confirmed their stability, which makes them ready for practical applications.