Abstract
This study was carried out to establish the electron beam welding process for a nuclear fuel plate assembly fabrication. A preliminary investigation for plate fuel fabrication was conducted with a consideration of weld performance using AA6061-T6 aluminum alloy made by the EBW (Electron Beam Welding) process. The optimum welding parameters for the fuel plate assembly were obtained in terms of the accelerating voltage, beam current and welding time. The welds made by the optimum parameters showed slightly lower tensile strengths than those of the un-welded specimens. The integrity of the welds by the EBW process was confirmed by the results of the tensile test, an examination of the macro-cross sections and the fracture surfaces of the welded specimens.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: The Proceedings of the International Conference on Nuclear Engineering (ICONE)
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
