Hysteresis and Surface Shear Stresses During Snow-Particle Aeolian Transportation

Abstract

Surface shear stresses produced by wind and particle collision play a key role in aerodynamic entrainment and splash processes. The fluid shear stress at the surface during aeolian transport has been researched for decades; however, the equilibrium property reported in the literature, numerical simulations, and experiments is inconsistent. To discuss this discrepancy, this study investigates fluid and particle shear stresses at the surface during the aeolian transport of snow particles using a two-dimensional random-flight model of drifting snow. The simulations are performed for various friction velocities on a loose snow bed. By varying the wind conditions in stages, the transport hysteresis is confirmed, and the impact threshold is estimated from the particle transport rate (0.206,hbox {m,s}^{-1}). The friction velocity at the surface during transport decreases marginally with an increase in wind speed caused by the impact threshold, revealing that our results do not contradict Owen’s second hypothesis. The total shear stress, which is calculated by summing the fluid and particle shear stresses, is vertically uniform in the equilibrium state; thus, the increase in the particle shear stress decreases the fluid shear stress at the surface. The equilibrium property of the fluid shear stress near the surface changes significantly with height (from a decreasing trend to an increasing trend) because the particle shear stress decreases rapidly in the height range of 1–10 mm. Our findings suggest that it is difficult to accurately measure the fluid shear stress in the surface vicinity using anemometers, and a new methodology is needed.