Hydroxyapatite (HAP) formation in acetate-driven partial denitrification process: Enhancing sludge granulation and phosphorus removal

Abstract

Partial denitrification/anammox (PD/A) processes have emerged as a promising technology for efficient nitrogen removal from wastewater. However, these processes fail to remove phosphorus (P), a key pollutant that contributes to water eutrophication. To address this issue, the potential of inducing hydroxyapatite (HAP) precipitation in PD processes to achieve simultaneous P removal was investigated for the first time. Specifically, three SBRs (R1-R3) for PD were operated with adding varying concentrations of external Ca (30, 60, and 120 mg/L, respectively). Results demonstrated significant P reduction in all three SBRs, particularly in R3 with high Ca, which achieved an 80 % removal efficiency. Notably, sludge granulation was observed during operation, with the granule size in R3 with high Ca reaching 906.1 μm during the stable period, exceeding those in R2 (788.7 μm) and R1 (707.1 μm). This led to good settle ability of the PD sludge, as demonstrated by the lowest SVI5 (20 mL/g MLSS). Moreover, the decrease in the MLVSS/MLSS ratio suggested that the inorganic content accumulated, as observed by confocal laser scanning microscopy in the interior of the granules. Elemental composition analysis suggested that PD granules contained high P and Ca, while the X-ray diffraction (XRD) results confirmed the formation of HAP. Overall, this study demonstrated that PD-HAP coupled granular sludge process has potential as a robust and efficient method for nitrite production, as well as effective P removal and recovery, thereby advancing the application of anammox processes in wastewater treatment.