Abstract

Hydrotreating of Jatropha oil and Jatropha oil blended gas oil feeds were studied under diesel hydrotreating conditions using Cobalt-Molybdenum catalyst on activated carbon. The experiments were carried out in pilot plant for more than 90 days first with gas oil, followed by 5%, 10%, and 20% Jatropha oil in gas oil and finally with Jatropha oil alone. Deactivation of the catalyst was not observed up to hydrotreating of 20 wt% Jatropha oil in gas oil, but, the reactor pressure shoots up after seven days of running neat Jatropha oil. The liquid products were characterized by GC-MS analysis, distillation, density, sulfur, nitrogen, and Cetane Index.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.