Abstract

The single-phase CoMoO4 was prepared via a facile hydrothermal method coupled with calcination treatment at 400 °C. The structures, morphologies, and electrochemical properties of samples with different hydrothermal reaction times were investigated. The microsphere structure, which consisted of nanoflakes, was observed in samples. The specific capacitances at 1 A g−1 are 151, 182, 243, 384, and 186 F g−1 for samples with the hydrothermal times of 1, 4, 8, 12, and 24 h, respectively. In addition, the sample with the hydrothermal time of 12 h shows a good rate capability, and there is 45% retention of initial capacitance when the current density increases from 1 to 8 A g−1. The high retain capacitances of samples show the fine long-cycle stability after 1000 charge-discharge cycles at current density of 8 A g−1. The results indicate that CoMoO4 samples could be a choice of excellent electrode materials for supercapacitor.

Highlights

  • It is important to develop the conversion and storage of renewable alternative energy because of the rapid decay of fossil fuels

  • According to the mechanism of charge storage, supercapacitors could be classified into electrochemical double-layer capacitors (EDLCs) and redox electrochemical capacitors (i.e. pseudocapacitance (PCs))

  • In summary, the CoMoO4 microspheres have been successfully synthesized by hydrothermal growth process coupled with calcinations treatment

Read more

Summary

Introduction

It is important to develop the conversion and storage of renewable alternative energy because of the rapid decay of fossil fuels. According to GCD test results, the samples show specific capacitances of 151, 182, 243, 384, and 186 F g−1 at current density of 1 A g−1 in 2 M KOH electrolyte.

Results
Conclusion
Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.