Hydrothermal characteristics of a double flow parabolic trough solar collector equipped with sinusoidal-wavy grooved absorber tube and twisted tape insert

Abstract

PurposePresent investigation conducts a study on the hydrothermal features of a double flow Parabolic Trough Solar Collector (PTSC) equipped with sinusoidal-wavy grooved absorber tube and twisted tape insert filled with nanofluid. This paper aims to present an effectual PTSC which is comprised by nanofluid numerically by means of finite volume method.Design/methodology/approachThe beneficial results such as pressure drop inside the absorber tube, mean predicted friction factor, predicted average Nusselt number and hydrothermal Performance Evaluation Criteria (PEC) are evaluated and reported to present the influences of numerous factors on studied interest outcomes. Effects of different Reynolds numbers and environmental conditions are also determined in this investigation.FindingsIt is found that using the absorber roof (canopy) can enhance the heat transfer ratio of PTSCs significantly during all studied Reynolds numbers. Also, it is realized that the combination of inner grooved surface, outer corrugated surface and inserting turbulator can improve the thermal-hydraulic characteristics of PTSCs sharply.Originality/valueNovel PTSC (N.PTSC) filling with two Heat Transfer Fluids (HTFs), inner and outer surface corrugated absorber tube, absorber roof and inserting twisted tape (N.PTSC.f) has the highest PEC values among all novel configurations along all investigated Reynolds numbers which is followed by configurations N.PTSC with two HTFs and inserting twisted tape (N.PTSC.e), N.PTSC with two HTFs and outer surface corrugated absorber tube (N.PTSC.b) and N.PTSC with two HTFs and inner surface corrugated absorber tube (N.PTSC.c), respectively. N.PTSC.f Nusselt number values can overcome the high values of friction factor, and therefore is introduced as the most efficient model in the current study.