Abstract
Hydrothermal carbonization (HTC) increasingly appears as an eco-friendly method for managing food waste (FW). In this work, a combination of FW was subjected to HTC, and products were critically evaluated. This involved a lab-scale pressure reactor and optimization of HTC conditions: temperature (220–340 °C) and residence time (90–260 min) via central composite design type of response surface methodology (CCD-RSM). Results showed varying temperatures and residence time to impact the hydrochar (HC) and hydrothermal carbonization aqueous phase (HTC-AP) properties. Although HC produced through HTC exhibited lower ash content (<2%) despite higher fixed carbon (>55 %) with respect to the raw FW, the heating value of HC ranged from 19.2 to 32.5 MJ/kg. Temperature primarily influenced FW conversion, affecting carbonaceous properties. Saturated fatty acids (SFA) were found to be predominant in the HTC-AP under all tested operating conditions (77.3, 48.4, and 37.1 wt% for HTC at 340, 280, and 220 °C in 180 min, respectively). Total phosphorus recovery in HC and HTC-AP respectively peaked at 340 °C and 220 °C in 180 min. The study concludes that HTC holds promise for energy-dense biofuel production, nutrient recovery, and fostering a circular economy.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
