Abstract

Abstract. Debris flows, triggered by extreme precipitation events and rapid snow melt, cause considerable damage to the Norwegian infrastructure every year. To define intensity-duration (ID) thresholds for debris flow initiation critical water supply conditions arising from intensive rainfall or snow melt were assessed on the basis of daily hydro-meteorological information for 502 documented debris flow events. Two threshold types were computed: one based on absolute ID relationships and one using ID relationships normalized by the local precipitation day normal (PDN). For each threshold type, minimum, medium and maximum threshold values were defined by fitting power law curves along the 10th, 50th and 90th percentiles of the data population. Depending on the duration of the event, the absolute threshold intensities needed for debris flow initiation vary between 15 and 107 mm day−1. Since the PDN changes locally, the normalized thresholds show spatial variations. Depending on location, duration and threshold level, the normalized threshold intensities vary between 6 and 250 mm day−1. The thresholds obtained were used for a frequency analysis of over-threshold events giving an estimation of the exceedance probability and thus potential for debris flow events in different parts of Norway. The absolute thresholds are most often exceeded along the west coast, while the normalized thresholds are most frequently exceeded on the west-facing slopes of the Norwegian mountain ranges. The minimum thresholds derived in this study are in the range of other thresholds obtained for regions with a climate comparable to Norway. Statistics reveal that the normalized threshold is more reliable than the absolute threshold as the former shows no spatial clustering of debris flows related to water supply events captured by the threshold.

Highlights

  • A debris flow is a form of rapid mass movement in which a combination of loose soil, rock, organic matter and water mobilize as a slurry that flows downslope (Innes, 1983; Rickenmann and Zimmermann, 1993; Hungr et al, 2008)

  • Using information on rainfall and snow melt the actual amount of supplied water was estimated in order to derive these thresholds

  • – For both set of thresholds obtained in this study the intensities needed for debris flow initiation decrease as the duration of water supply increases

Read more

Summary

Introduction

A debris flow is a form of rapid mass movement in which a combination of loose soil, rock, organic matter and water mobilize as a slurry that flows downslope (Innes, 1983; Rickenmann and Zimmermann, 1993; Hungr et al, 2008). Debris flows are commonly triggered by intense surface-water flow caused by heavy precipitation or rapid snow melt, leading to the erosion and mobilization of loose soil or rock on steep slopes. The high water supply causes saturation and loss of suction in unsaturated soils as well as a rapid increase in pore pressure in saturated soils, leading to a decrease in the shear strength of the sediments and triggering of the initial slide. It plays a key role in the transition of the slide to flow

Objectives
Results
Discussion
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call