Abstract
This study deals with the development of an innovative hydrometallurgical process for zinc recovery from Waelz Oxide, a concentrate of zinc and lead oxides obtained pyrometallurgically from the treatment of EAF dusts. Its main objective is the production of a zinc sulphate liquor to be used as feedstock in electrolytic processes. The process requires different stages to achieve this goal. The first stage consists of a double-sulphuric-acid-leaching, achieving a 88% lixiviation of the zinc present in the Waelz Oxide. After the leaching, to fulfil the strict requirements of an electrolysis feed, some purifying stages, such as oxidation, removing more than the 99% of the iron present in the leach liquor, and cementation to remove cadmium, lead and copper were investigated. Finally, if the concentration of some metallic impurity is above the accepted level for electrolytic processes, an additional purification stage could be considered. Through this process, sulphate zinc liquors with a zinc purity of around 99.75%, containing less than 135 ppm of metallic impurities, could be obtained.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
