Hydrolytic hydrogen production behavior in NaCl solution of Mg and Mg-GO composite synthesized by mechanochemical reaction

Abstract

With the help of the mechanochemical reaction (MCR) strategy, the composition optimization, structure regulation and surface modification of metallic Mg are realized by introducing GO in the high energy mechanical ball milling process to enhance the hydrogen production performance in NaCl solution. The synthetic process of Mg and Mg-GO composite by MCR is systematically optimized and the microstructure evolution as well as the hydrolytic hydrogen production behavior are investigated. Phase composition optimization and microstructure regulation can be effectively implemented during the MCR process. The response rate of the repeated hydrogen-filling MCR sample is faster than that of the single hydrogen-filling MCR sample. The hydrogen production rates at 298 K of 4, 8, 12, 16 and 20 h MCR Mg with repeated H2-filling can reach to 922, 934, 890, 917 and 1131 mL/g/min, respectively. The internal microstructure refinement, surface modification, moderate activity, appropriate particle size, surface defects and reasonable mass transfer channels of MCR 8 h Mg-GO composite are the reasons for the fast rates and high yields of hydrolytic hydrogen production. 365.3, 864.4 and 933.8 mL/g H2 can be produced by 8 h MCR Mg-GO composite within 1, 3 and 10 min, respectively. The hydrogen production rate of 8 h MCR Mg-GO composite is as high as ∼600 mL/g/min. Mechanochemical reaction strategy with catalyst is a useful method to improve the hydrolysis hydrogen production performance of metallic Mg when well matched with the added catalyst.