Abstract
A new elastic polyurethane (PU) adhesive was reported in this study to improve the stability and durability of the dental adhesion interface. A polyurethane oligomer was synthesized by the solution polymerization method, and a diluent and solvent were added to prepare PU adhesives. The water sorption, water solubility, contact angle, thermal stability, degree of conversion and mechanical properties of the PU adhesives were evaluated. Experimental applications for tooth restoration (microtensile bond strength and microleakage) were also performed, and cytotoxicity test was carried out. The water sorption and solubility of the PU adhesives were significantly lower than those of three commercial adhesives. The microtensile bond strength of the PU adhesives was improved after thermocycling test, and the extent of microleakage was diminished when compared with that of commercial adhesives. Biocompatibility testing demonstrated that the PU adhesive was non-toxic to L929 fibroblasts. This study shows the ability of PU adhesive to improve the stability and durability of the dental adhesion interface and may refocus the attention of scientists from rigid bonding to flexible bonding for dental adhesion, and it sheds light on a new strategy for the stable and durable bonding interface of dentine adhesives.
Highlights
Composite resin has been widely used in dental restoration for more than 60 years due to its aesthetic advantages, excellent mechanical properties, ease of use and acceptable price [1,2,3,4]
The failure of restorations is mainly due to defects in the bonding interface, which are caused by the polymerization stress when the composite resin is polymerized using a curing light [9]
The protons belonging to the H of methylene (CH2) from hydroxyethyl methacrylate (HEMA) were clearly shown at 6.11 ppm
Summary
Composite resin has been widely used in dental restoration for more than 60 years due to its aesthetic advantages, excellent mechanical properties, ease of use and acceptable price [1,2,3,4]. Different volume expansion and contraction will occur repetitively between dentine and composite resins, which may cause stress within the adhesive layer and eventually lead to the occurrence of gaps in the bonding interface [13]. Bacteria and their acidic by-products, bacterial enzymes, liquids in the mouth and nutrients can penetrate into the interfacial gap, causing microleakage and eventually leading to demineralization of the teeth and secondary caries [14]. Yingchao and colleagues introduced a polyurethane elastic layer between the adhesive and the composite resin to buffer the stress generated by the restoration during use [13]. A schematic model for this elastic PU adhesive used for tooth dentine bonding is illustrated in figure 1
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
