Hydrogen Sensor Based on Au and YSZ/HgO/Hg Electrode for in Situ Measurement of Dissolved H2 in High-Temperature and -Pressure Fluids

Abstract

Gold as a hydrogen-sensing electrode for in situ measurement of dissolved H2 in aqueous solutions under extreme conditions is reported. The dissolved H2 sensor, constructed with a Au-based sensing element and coupled with a YSZ/HgO/Hg electrode, is well suited for determining dissolved H2 concentrations of aqueous fluids at elevated temperatures and pressures. The Au electrode is made of Au wire mounted in a quartz bar, which can be pressurized and heated in the high-pressure and -temperature conditions. The Au-YSZ sensor has been tested for its potential response to the concentrations of dissolved H2 in fluids by using a flow-through reactor at high temperatures up to 400 degrees C and pressures to 38 MPa. Good sensitivity and linear response between the hydrogen concentrations in the fluids and the H2 sensor potentials are reported for hydrogen gas in the concentration range of 0.1-0.001 M H2 in aqueous fluids at temperatures up to 340 degrees C and 30 MPa. Nernstian response of the cell potential to dissolved H2 in fluids was determined at 340 degrees C and 30 MPa, described as follows: DeltaE = 0.9444 + 0. 0603 log m H2 The experimental results indicate that the Au-YSZ/HgO/Hg cell can be used to measure the solubility of H2 in aqueous fluid at temperatures and pressures near to the critical state of water. Thus, this type of Au hydrogen sensor could be easily used for in situ measurement of H2 in hydrothermal fluids in a high-pressure vessel, or at midocean ridge, due to its structure of compression resistance.