Hydrogen production via surrogate biomass gasification using 5% Ni and low loading of lanthanum co-impregnated on fluidizable γ-alumina catalysts

Abstract

Abstract Nickel on alumina support offers opportunity for gasification of biomass for hydrogen production. In a recent contribution from our research team, (González Castañeda, D. G., et al. 2019) showed that cerium or lanthanum co-impregnation at 2 wt% with nickel may have a favorable effect for biomass catalytic gasification. However, and given an observed influence of lanthanum on the formation of small Ni crystallite sizes, five Ni/γ-Al2O3 based fluidizable La promoted catalysts were studied. Nickel-alumina catalysts promotion was effected varying La in the 0.5 and 1.0 wt% range. Once impregnation precursors loaded, they were reduced at 480 °C via an activation step. Catalysts were characterized using BET, XRD, AA, TPR, TPD, H2-chemisorption, TEM-EDX and FTIR. Catalyst performance was established in a fluidized CREC Riser Simulator, using: a) glucose as surrogate biomass, b) 600 °C, c) steam/biomass (S/B) ratio of 1, d) catalyst /biomass (C/B) ratio of 3.2 and e) 20 s reaction time. Data obtained was analyzed using an ANOVA statistical data analysis package with the 5 wt% Ni and 0.5–1 wt% La and Ce on γ-Al2O3 catalysts, prepared using a pH of 1 of impregnating solution were the best yielding 0.53–0.56 hydrogen molar fractions. These catalysts also gave a 39% reduced coke, and this while compared with the coke formed on the 2% Ce – 5 wt%Ni/γ-Al2O3 (González Castañeda, D. G., et al. 2019). This promising performance was assigned to the dominant NH3-TPD medium acidity, the high catalyst specific surface (∼140 m2/g), and the good 9% metal dispersion with 9–10 nm nickel crystallites.