Abstract
AbstractHydrogen production from partial oxidation reforming of methane in a gliding arc discharge (GAD) reactor is investigated. The effects of input power, the oxygen‐carbon molar ratio (O/C), and residence time are studied, respectively. Products such as H2, CO, CO2, and C2‐C4 hydrocarbons can be detected in the outlet gas. The experimental result shows that the input power of 36.4 W, the relitively low O/C of 0.705 and the 13.8 s residence time in this system will bring the highest H2 energy yield. Compared to the decomposition of methane, partial oxidation of methane with air can maintain a stable discharge state and no carbon deposition on electrodes is observed during the reaction process. Optical emission spectroscopy (OES) is also employed to characterize this methane‐air plasma. Based on the results of the experiment and OES, a possible mechanism of methane partial oxidation process was proposed, which points out that collisions of high‐energy electrons and excited N2 species (mainly N2(A)) with other species (such as O2, CH4) in the plasma region are two main ways for the activation of this reforming system. Hydrogen is generated principally through the H‐abstraction reaction and the H‐coupling reaction.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.