Abstract
We propose and demonstrate hydrogen peroxide (H2O2) and glucose concentration measurements using a plasmonic optical fiber sensor. The sensor utilizes a tilted fiber Bragg grating (TFBG) written in standard single mode communication fiber. The fiber is over coated with an nm-scale film of silver that supports surface plasmon resonances (SPRs). Such a tilted grating SPR structure provides a high density of narrow spectral resonances (Q-factor about 105) that overlap with the broader absorption band of the surface plasmon waves in the silver film, thereby providing an accurate tool to measure small shifts of the plasmon resonance frequencies. The H2O2 to be detected acts as an oxidant to etch the silver film, which has the effect of gradually decreasing the SPR attenuation. The etching rate of the silver film shows a clear relationship with the H2O2 concentration so that monitoring the progressively increasing attenuation of a selected surface plasmon resonance over a few minutes enables us to measure the H2O2 concentration with a limit of detection of 0.2 μM. Furthermore, the proposed method can be applied to the determination of glucose in human serum for a concentration range from 0 to 12 mM (within the physiological range of 3-8 mM) by monitoring the H2O2 produced by an enzymatic oxidation process. The sensor does not require accurate temperature control because of the inherent temperature insensitivity of TFBG devices referenced to the core mode resonance. A gold mirror coated on the fiber allows the sensor to work in reflection, which will facilitate the integration of the sensor with a hypodermic needle for in vitro measurements. The present study shows that Ag-coated TFBG-SPR can be applied as a promising type of sensing probe for optical detection of H2O2 and glucose detection in human serum.
Highlights
The detection of hydrogen peroxide, H2O2, at low concentration is an important analytical task due to its importance in pharmaceutical, clinical, environment, mining, textile and food manufacturing applications
Various analytical techniques have been developed for this task, such as fluorescence [6] chemiluminescence [7, 8], titration [9], spectrophotometry [10], and electrochemical techniques [11], Some surface plasmon resonance (SPR) devices based on different surface functionalized nanomaterials such as nanoparticles [12,13,14] nanoshells [15] nanowires [16] and nanorods [17] have been used to quantitatively determine H2O2 concentration
The plasmonic tilted fiber Bragg grating (TFBG) sensor was powered by a broadband source (BBS) with wavelength range of 1460-1560 nm and its reflection spectrum was monitored by an optical spectrum analyzer (OSA) with wavelength resolution of 0.02 nm
Summary
The detection of hydrogen peroxide, H2O2, at low concentration is an important analytical task due to its importance in pharmaceutical, clinical, environment, mining, textile and food manufacturing applications. H2O2 has been used in liquid-based fuel cells and in organic synthesis because it is a powerful oxidizing agent [4, 5]. It is important for both academic research and industrial purposes to be able to detect and accurately measure H2O2 concentration. Various analytical techniques have been developed for this task, such as fluorescence [6] chemiluminescence [7, 8], titration [9], spectrophotometry [10], and electrochemical techniques [11], Some surface plasmon resonance (SPR) devices based on different surface functionalized nanomaterials such as nanoparticles [12,13,14] nanoshells [15] nanowires [16] and nanorods [17] have been used to quantitatively determine H2O2 concentration. The sample preparation for existing measurement techniques is relatively time-consuming and the measurements are vulnerable to environmental influences such as temperature, dust, spatial light coupling fluctuations
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.