Hydrogen etching of Si 3N 4 layers with plasma assisted hot wire CVD

Abstract

In order to develop sustainable processes for clean manufacturing environment for thin film or other solar cell production, we studied the hydrogen etching of silicon nitride (Si 3N 4) films on flat crystalline silicon (c-Silicon) substrates. With an arrangement primarily constructed for hot wire CVD (HWCVD) deposition of thin silicon films also cleaning processes with atomic hydrogen were studied with a simplified three wire assembly. The three filaments could be biased independently by different potential. A variation of hydrogen pressure and flow was performed to find out conditions of high etching rates for the Si 3N 4 layers. The etching rate was simply determined by measuring the time for total removal of the film, since this could be easily detected by the change of the anti-reflection property. Etching rates of 0.1 nm/s have been obtained under 15 Pa and a flow of 50 sccm. An intensive study was carried out of the direct current (DC) plasma hot wire CVD conditions.