Hydrogen embrittlement and associated surface crack growth in fine-grained equiatomic CoCrFeMnNi high-entropy alloys with different annealing temperatures evaluated by tensile testing under in situ hydrogen charging

Abstract

The effect of the annealing temperature after cold rolling on hydrogen embrittlement resistance was investigated with a face-centered cubic (FCC) equiatomic CoCrFeMnNi high-entropy alloy using tensile testing under electrochemical hydrogen charging. Decreasing annealing temperature from 800 °C to 750 °C decreased grain sizes from 3.2 to 2.1 μm, and resulted in the σ phase formation. Interestingly, the specimen annealed at 800 °C, which had coarser grains, showed a lower hydrogen embrittlement susceptibility than the specimen annealed at 750 °C, although hydrogen-assisted intergranular fracture was observed in both annealing conditions. Because the interface between the FCC matrix and σ was more susceptible to hydrogen than the grain boundary, the presence of the matrix/σ interface significantly assisted hydrogen-induced mechanical degradation. In terms of intergranular cracking, crack growth occurred via small crack initiation near a larger crack tip and subsequent crack coalescence, which has been observed in various steels and FCC alloys that contained hydrogen.