Hydroforming of double-layer Y-shaped tube controlled by a novel backward punch shape

Abstract

PurposeA new backward punch shape was designed and used in the hydroforming process of double-layer Y-shaped tubes to achieve uniform wall thickness. This study focuses on the implementation and effectiveness of this novel punch shape.Design/methodology/approachA numerical simulation and experimental validation of the hydroforming process of double-layer Y-shaped tubes under various backward punch, replenishment ratios (left and right feed ratios) and internal pressure loading paths was performed using finite elements. During the hydroforming process, an analysis was made on the distribution of stress, strain and wall thickness in both the inner and outer layers of the Y-shaped conduit.FindingsThe novel backward punch parallel to the main tube has been found to improve the distribution of wall thickness in Y-shaped tubes. By controlling the feeding ratio and modifying the loading path of the internal pressure, it is possible to obtain the optimal forming part of the double-layer Y-shaped tube. The comparison between the simulation and experimental results of the double-layer Y-shaped tube formed under the optimal path indicates that the error is within 5% and the distribution of wall thickness is consistent.Originality/valueA novel backward punch technique is employed to control the hydroforming process in a Y-shaped tube. A study on hydroforming of double-layer Y-shaped tubes with asymmetric features and challenging forming conditions is being suggested.