Hydrodynamics of a Novel Biomass Autothermal Fast Pyrolysis Reactor: Flow Pattern and Pressure Drop

Abstract

AbstractA novel biomass, autothermal, fast pyrolysis reactor with a draft tube and an internal dipleg dividing the reactor into two interconnected beds is proposed. This internally interconnected fluidized beds (IIFB) reactor is designed to produce high‐quality bio‐oil using catalysts. Meanwhile, the pyrolysis by‐products, i.e., char, coke and non‐condensable gases, are expected to burn in the combustion bed to provide the heat for the pyrolysis. On the other hand, the catalysts can be regenerated simultaneously. In this study, experiments on the hydrodynamics of a cold model IIFB reactor are reported. Geldart group B and D sand particles were used as the bed materials. The effects of spouting and fluidizing gas velocities, particle size, static bed height and the total pressure loss coefficient of the pyrolysis bed exit, on the flow patterns and pressure drops of the two interconnected beds are studied. Six distinct flow patterns, i.e., fixed bed (F), periodic spouted/bubbling bed (PS/B), spouted bed with aeration (SA), spout‐fluidized bed (SF), spout‐fluidized bed with slugging (SFS) and spouted bed with backward jet (SBJ) are identified. The investigations on the pressure drops of the two beds show that both of them are seen to increase at first (mainly in the F flow pattern), then to decrease (mainly in the PS/B and SA flow patterns) and finally to increase again (mainly in the SA and SF flow patterns), with the increase of the spouting gas velocity. It is observed that a larger particle size and lower static bed height lead to lower pressure drops of the two beds.