Abstract

The objective of the present work was to characterize gas holdup (εG), volumetric oxygen mass transfer coefficient (kLa), and specific gas-liquid interfacial area (a) in a water-in-diesel microemulsion (WDME) as a liquid model for aerobic biodesulfurization inside an airlift reactor with a net draft tube (ALR-NDT) when aerated at different rates ranging from 0.05 to 1vvm. For comparison, the hydrodynamics of ALR (with solid draft tube) and bubble column reactor (‘BCR’, with no use of draft tube) were also studied for water, diesel and WDME systems. In all reactors, the εG and kLa values for diesel-based liquids were higher compared to the water system. This indicates the coalescence-inhibiting tendency of petroleum liquids mainly due to the lower surface tension which resulted to a decrease in bubble size distribution (i.e., 0.29–1.90mm for the WDME versus 0.43–14.17mm for water in the ALR-NDT). Although the kLa values in ALR-NDT were maintained between those values obtained in ALR and BCR for all fluids; however, the transition points from homogeneous to heterogeneous regime were shifted to higher aerations in the ALR-NDT. In this regard, empirical correlations were developed by considering the physicochemical properties of the liquid phase and superficial gas velocity.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.