Abstract
In this work, the extraction of U(VI) by tributyl phosphate (TBP) is studied in small channels of different sizes, operated in segmented flow. The variables analysed include the channel diameter (1–4 mm I.D.), mixture velocity (1.06 - 4.24 cm s−1), volume fraction of the continuous phase (between 0.200 and 0.500), and concentration of extractant (TBP 30% v/v in kerosene and TBP 100%). The hydrodynamic characteristics of the flow, such as plug and slug lengths, specific interfacial area, and dispersed phase holdup, were obtained experimentally using high-speed imaging, while the pressure drop was measured with a differential pressure transducer. These parameters were correlated to the studied variables. The concentration of uranium in the aqueous phase was measured with UV-vis spectroscopy, and the mass transfer coefficients were compared with the predictions of a numerical model of segmented flow developed in Comsol Multiphysics, with good agreement.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Chemical Engineering and Processing - Process Intensification
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
