Abstract
Abstract Hydrodynamic forces on small diameter subsea pipelines and cables placed near seabed are important for their on-bottom stability design. In offshore environments, these pipelines are usually subjected to extreme wave conditions. The present study investigates hydrodynamic forces acting on a pipeline near a flat seabed subjected to a wave-induced boundary layer flow. The Keulegan-Carpenter numbers (KC) of the wave-induced boundary layer flow are 20, 140 and 200, defined based on the pipeline diameter (D), the maximum velocity of the undisturbed near-bed orbital velocity (Uw) and the period of the incoming oscillatory flow (Tw). Reynolds number is 1 × 104 based on Um and D. A seabed roughness ratio ks/D (ks is the Nikuradse equivalent sand roughness) of up to 0.1 and different gap ratios of G/D = 0.05∼0.5 between the pipeline and the seabed are considered. Numerical simulations have been carried out based on two-dimensional (2D) Unsteady Reynolds-Averaged Navier-Stokes (URANS) equations combined with the k-ω Shear Stress Transport (SST) turbulence model. A preliminary one-dimensional (1D) simulation is carried out to obtain a fully developed wave-induced boundary layer velocity profile, which is used as inlet flow for the 2D simulations. The numerical model is validated against the experimental data reported by Sumer et al. (1991)[1] at KC = 10. Influences of KC, ks/D and G/D on the hydrodynamic forces and the surrounding flows are discussed in detail.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.