Abstract
A report is presented on the SVC (static VAR compensator) control stability studies undertaken as part of an overall system improvement project. It is shown that for an all-shunt network, a regulator setting of T/sub r/=0.5 s would be stable for many contingencies, but some contingencies would require gain-supervisor action and transfer-trip automatisms to ensure system security. The transfer-trip automatisms would be complex and require much study to identify. Thus, from the perspective of SVC voltage regulator stability, the all-shunt option is the least desirable. For a mostly series network, a regulator setting of T/sub r/>0.25 s provides good stability margin for all system contingencies. This means that system security is not dependent upon a complex set of transfer-trip automatisms. A few new design considerations for the power system have been identified, due to adding series compensation. The major new phenomenon is a low-frequency oscillation between shunt reactors and the series capacitors, which has very little natural damping. The SVC voltage regulators will decrease the damping of these modes, and may cause them to become unstable. To insure against such instability, it is proposed that high-pass filters with a break frequency of 20 Hz be applied to all SVCs. >
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.