Abstract
Palladium catalysts supported on functionalized multi-wall carbon nanotubes were synthesized for hydro-purification of crude terephthalic acid containing 2100ppm 4-carboxybenzaldehyde (4-CBA) as impurity. PdCl2 and Pd(OAc)2 were used as precursors. Palladium loadings were 0.05 to 0.6wt.% with catalysts reduced at 200 to 400°C. Catalysts prepared from both precursors with least 0.3wt.% palladium resulted in 99%+ removal of 4-CBA. The most desired selectivity was obtained for the catalyst with PdCl2 as precursor, reduction temperature of 300°C, and palladium loading of 0.3wt.%. This catalyst had slightly better performance than the commercial catalyst (0.5wt.% of palladium on activated carbon).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
